Alesis MICROVERB 4 - Specifications

Specifications
42 MicroVerb 4 Reference Manual
SPECIFICATIONS
Electrical
Frequency Response: ±1dB from 20Hz to 20 kHz
Dynamic Range: >90dB "A" wtg., 20 Hz-22kHz
Distortion: <0.009% @ 1kHz, nominal level (-12 dBfs)
<0.005% @ peak level
Crosstalk: <90dB below full scale
Input
Number of Channels: 2
Format: 1/4" unbalanced
Nominal Level: -10 dBV, adjustable to +4 dBv
Maximum Level: +10 dBV
Impedence: 1MW/channel stereo, 500kW/channel mono
A/D - D/A Conversions
Processor Speed: 3 MIPs (million instructions per second)
Processor Memory: 64K x 16 bits
A/D converter: 18 bit Sigma-Delta, 128 times oversampling
D/A converter: 18 bit Sigma-Delta, 8 times oversampling
Output
Number of Channels: 2
Format: 1/4" unbalanced
Maximum Level: +17.5dBu
Nominal Level -20 dBV or +4dBu, front- panel adjustable
Output Impedance: 500 ohms
Front Panel
Controls INPUT MIX
OUTPUT VALUE
EDIT A EDIT B
Buttons STORE BANK/MIDI
Indicators LED Display
LED Peak Meters
Rear Panel
Input (LEFT/MONO, RIGHT) 1/4" 2-conductor
Output (LEFT, RIGHT) 1/4" 2-conductor
FOOTSWITCH 1/4" Stereo (accepts normally open or normally
closed momentary footswitches, such as the
Alesis PD, and Stereo Footswitches)
MIDI (IN, OUT) 5 pin DIN
Power 9 Volt Power Transformer (Alesis P3)
Processing and Memory
User Programs (RAM): 100