Alesis MULTIMIX 16 User Manual

USB2.0 Recording
5
43
Assigning inputs to audio tracks
Now, you’re ready to assign the MultiMix’s inputs to various
channels.
For each audio track that you want to record, click on the input
section of the track and select the MultiMix channel that you want.
Record-enable the tracks to be recorded (first arrow).
You will do most of your monitoring through the mixer.
However, if you want to monitor with Sonar’s effects, or if
you just want to hear what the computer is hearing, press the
direct monitoring button next to the Record Enable button
(second arrow.).
Note that using direct monitoring causes a small delay as the
digital audio is being processed. For this reason, when you
use direct monitoring, you may want to press the MultiMix’s
MIX TO CONTROL ROOM button up so as not to hear
the audio signal twice.

Alesis MULTIMIX 16 Specifications

General

Channels	16
Type	Analog Mixer
Inputs - Mic Preamps	8
Inputs - Line	16
Phantom Power	Yes