8
USB (TO DEVICE)
SUS PEDALOUTPUT IN OUT
USB (TO HOST)
MIDI
Rear Panel
1. Power Input: Connect the included power adapter here.
2. USB Device Port: Connect a USB flash drive here to play MP3 songs. Up to a 32 GB
USB flash drive can be used.
Note: Do not disconnect the USB flash drive during MP3 playback. Doing this may cause
damage to the USB flash drive or the piano.
3. Aux Output: Use a 1/4" (6.35 mm) stereo cable to connect external audio equipment
such as an amplifier, mixer, or recorder.
4. Sustain Input: Connect the included sustain pedal here.
5. MIDI In: Connect this to the MIDI output of an external MIDI device (MIDI sequencer,
keyboard controller, pad controller, etc.) using a standard MIDI cable.
6. MIDI Out: Connect this to the MIDI input of an external MIDI device (MIDI sequencer,
drum machine, sound module, etc.) using a standard MIDI cable.
7. USB MIDI Port: Allows for transfer of MIDI data to a computer.
Note: Do not set the USB driver to be input and output simultaneously when
you are setting the software on the computer. Otherwise, the sound will be
overlapped when playing the keys.
8. Phones (Bottom Panel): Connect stereo headphones with a 1/4" (6.35 mm)
stereo phone plug. The piano’s internal speakers will be muted when
headphones are connected.
Sustain Pedal
Virtue's stand features three pedals that perform 3
different functions:
Soft Pedal: When this leftmost pedal is pressed,
the played notes will give a soft note (pianissimo)
effect.
Sostenuto Pedal: When this center pedal is
pressed, it sustains only those notes that are being
held down when the pedal is pressed, allowing
future notes played to be unaffected.
Sustain Pedal: When this rightmost pedal is
pressed, the played notes will give a sustain effect.
8
Soft Pedal
Sostenuto
Pedal
Sustain
Pedal
To Next Page
Loading...
Need help?
General
