To Next Page
M
Michael HollandSep 12, 2025
What to do if Alfa Laval ALP 15-85 is distorted?
- WwalkeralanSep 12, 2025
If the Alfa Laval Water Pump is distorted, loosen pipework connections and mount stress-free.
What to do if Alfa Laval ALP 15-85 is distorted?
If the Alfa Laval Water Pump is distorted, loosen pipework connections and mount stress-free.
How to prevent cold start in Alfa Laval ALP 15-85 Water Pump?
If you experience a cold start when delivering high-viscosity liquids with your Alfa Laval Water Pump, preheat the pumped liquid.
General| Type | Centrifugal pump |
|---|---|
| Speed | 2900 rpm |
| Liquid temperature | +120 °C |
| Flow Rate | 15 m³/h |
| Inlet Diameter | 40 mm |
| Outlet Diameter | 32 mm |
| Operating Temperature | +120°C |
Definitions of warning grades (Danger, Warning, Caution, Note) used in the text.
Explains the intended use and limitations of the pump.
Describes the internal construction and working principle of screw pumps.
Lists and identifies the individual parts of the pump.
Lists common faults and their potential causes/remedies.
Provides step-by-step guidance for diagnosing and resolving pump issues.
Outlines essential safety precautions for performing maintenance work.
Details checks and actions needed for regular pump maintenance.
Step-by-step guide for removing and installing the elastomer coupling.
Detailed procedures for replacing the mechanical seal and ball bearing.
Lists the maximum and minimum operating parameters for the pump.
Provides NPSH values for various conditions to prevent cavitation.
Provides detailed dimensional drawings and specifications for the pump and unit.
Contains tables detailing pump capacity under various conditions and frequencies.
Provides guidelines and demands for mounting the pump in its operational location.
Instructions on preventing impurities from entering the pump during installation.
Requirements and guidelines for pipe installation, support, and connection.
Procedures for preparing and starting the pump for operation.
Safety precautions and methods for lifting the pump or pump unit.
Guidelines for storing the pump, including preservation methods.
Guidelines for the environmentally responsible disposal of the pump.
Lists available spare part kits and their corresponding part numbers.
Provides torque specifications for various screws used in assembly and maintenance.
