Need help?Do you have a question about the Alfa Laval SRU series and is the answer not in the manual?
General| Pump Type | Rotary Lobe Pump |
|---|---|
| Application | Food, beverage, pharmaceutical industries |
| Material (Pump Head) | Stainless Steel (AISI 316L) |
| Elastomers | EPDM, NBR |
| Certifications | EHEDG, 3-A, FDA |
| Cleanability | CIP (Clean-in-Place) and SIP (Sterilize-in-Place) capable |
Details on the SRU pump, its features, and flexible port orientation.
Understanding warnings, cautions, and notes for safe pump use.
Explanation of symbols for electrical voltage and caustic agents.
Key safety measures for pump installation, operation, maintenance, and transport.
Procedures for receiving, inspecting, and storing the pump unit.
Guidelines for designing pumping systems and correctly installing the pump.
Steps for setting up flushed seals and performing essential pre-operation checks.
Guidelines for environmentally responsible recycling of pump materials.
Steps for manually cleaning the pump or using a CIP method.
Recommended checks and spare parts for maintaining pump performance.
Step-by-step guide for safely disassembling the pump unit.
Procedures for reassembling pump components like bearings and shafts.
Instructions for removing and installing mechanical seals.
Details on disassembling, assembling, and adjusting the pressure relief valve.
Information on fitting and using optional heating/cooling devices.
Common pump issues, their causes, and recommended solutions.
Specifications for oil capacities and pump unit weights for different models.
Detailed clearance data (front, back, radial, mesh) for SRU pump models.
Exploded view and part number list for the SRU1 pump.
Exploded view and part number list for the SRU2 pump.
Exploded view and part number list for the SRU3 pump.
Exploded view and part number list for the SRU4 pump.
Exploded view and part number list for the SRU5 pump.
Exploded view and part number list for the SRU6 pump.
To Next Page