Alfa Laval Gunclean Toftejorg 270FT Mark 1 User Manual

Page 24 Instruction Manual, Gunclean Toftejorg 270FT Mark I
IM-TE102766-3-EN10
Installation and Normal Operation (continued)
To Remove Cover
For programming, spot cleaning and service the cover has to be removed.
1. Loosen the two screws on top of Power Unit.
2. Unscrew the hand crank screw on the side of the Power Unit and remove the programming knob, fitted
with a grub screw.
3. Lift the cover.
Note: The hand crank screw must be thoroughly tightened when the cover is refitted to avoid loosening when
cleaning.
Warning:
Service must be made by trained or authorised staff.
Caution:
Before operation the cover must be put back.

Alfa Laval Gunclean Toftejorg 270FT Mark 1 Specifications

General

Brand	Alfa Laval
Model	Gunclean Toftejorg 270FT Mark 1
Category	Cleaning Equipment
Language	English