5 Troubleshooting
The following table provides troubleshooting advice to resolve common issues that you might face
when working with the ThinkT
op.
5.1 Calculating the error code
You need the error code to use the troubleshooting table. To determine the error code, you add the
numbers to the right of the active LED’s.
Example: The following control board shows 1 + 4 + 16, which results in error code #21.
2066-0064
Auto
Flex
Error
Rotary valve
Seat valve
1
2
1
6
8
4
GN
21
YE
R
D
Alternatively, you can use the LED colour patterns to determine the error code. For more information,
see Interpreting the error code patterns on page
28.
Check latest error
If you are trying to resolve a periodic error, and the error code is not displayed during troubleshooting,
you can press the ENTER button twice to view the latest error code.
200000549-1-EN-GB 25
EN
www.sks-online.com
www.sks-webshop.com
To Next Page
Loading...
Need help?
General
