3 Installation
Study the instructions carefully.
The items refer to the parts list and service kits section.
Check the valve for smooth operation after welding.
Step 3
Pre-use check:
1. Activate the valve using compressed air.
2. Open and close the valve several times to ensure that it
operates smoothly.
Pay special attention to the warnings!
2405-0010
3.4 Recycling information
• Unpacking
- Packing material consists of wood, plastics, cardboard boxes and, in some cases, metal straps
- Wood and cardboard boxes can be re-used, recycled or used for energy recovery
- Plastics should be recycled or burnt at a licensed waste incineration plant
- Metal straps should be sent for material recycling
• Maintenance
- During maintenance, oil and wearing parts in the machine are replaced
- All metal parts should be sent for material recycling
- Worn out or defective electronic parts should be sent to a licensed handler for material recycling
- Oil and all non-metal wear parts must be disposed in accordance with local regulations
• Scrapping
- At end of use, the equipment must be recycled according to the relevant local regulations. Besides the equipment itself,
any hazardous residues from the process liquidmustbeconsideredanddealtwithinapropermanner.Whenindoubt,or
in the absence of local regulations, please contact your local Alfa Laval sales company
13
To Next Page
Loading...
Need help?
General
