3 Installation
Study the instructions carefully and pay special attention to the warnings!
The valve has welding ends as standard but can also be supplied with fittings.
Step 3
To avoid water hammer, it is recommended to install the valve so
that the flow is against the closing direction.
Shock in the actuator must never occur.
Avoid water hammer!
Outlet
2405-0006
Inlet
Step 4
Avoid stressing the valve.
Pay special attention to:
-Vibrations.
- Thermal expansion of the pipelines.
- Excessive welding.
- Overloading of the pipelines.
Risk of damage!
2405-0007
!
9
To Next Page
Loading...
