Appendix
RT-Set Setup Wizard
For Windows users to connect to a wireless network easily, we also provide the
RT-Set setup wizard to help users set their preferred wireless network step by
step. You can configure your wireless network via this RT-Set setup wizard in the
following two modes:
Station mode (infrastructure): Select this mode to connect to the AP (access
point) in your LAN.
AP mode: Select this mode to perform this adapter as an AP (access point).
Connect to a wireless network in infrastructure mode
1.
To connect this adapter to an AP, select the “Station” from the drop down menu to
proceed.
2.
Switch to AP mode is in process.
To Next Page
Loading...
