Introduction to the ALFA Indoor USB Adapter
The ALFA WiFi indoor USB adapter provides users to launch IEEE 802.11n/b/g
or IEEE 802.11a/an/ac wireless network (depends on your Alfa USB adapter model)
at 150/300Mbps/600Mbps in the 2.4GHz frequency or 433/867Mbps/1300Mbps in
the 5GHz frequency (depends on your Alfa USB adapter model), which is also
compatible with IEEE 802.11a/b/g wireless devices at 11/54Mbps. You can
configure this adapter with AP mode to connect/share to other 2.4GHz or
5GHz wireless computers or with Infrastructure mode to connect to a
wireless AP or router for accessing to Internet. This adapter includes a
convenient Utility for scanning available networks and saving preferred
networks those users are usually
connected with.
Security encryption can also
be
configured by this utility.
Key Features
Complies with IEEE
802.11ac/a/b/g/n wireless
standard (Depends on Model)
Support driver for Windows
2000, XP,
Vista, Windows 7/8/8.1 and Windows
10
Complies with Universal Serial Bus
Rev.
1.0, 1.1, 2.0 and 3.0
specifications.(Depends on Model)
Supports auto-installation and
diagnostic utilities.
High Speed transfer data rate up
to 150/300Mbps in 2.4GHz and
433/867/1300Mbps in 5GHz
(Depends on Model)
Support wireless data encryption with
64/128-bit WEP, WPA (TKIP with IEEE
802.1x), and AES functions.
To Next Page
Loading...
