◆ Operation Mode — Enables and configures the keep alive time and configures the
on-demand idle time.
Note,
If static IP is required for your DSL modem then you need to click
Advanced tag followed by WAN to bring up Static IP Configuration
Option #3 - WAN
SETTINGS – ADSL Modem Mode:
Dual WAN (ADSL + 3G)
You may enable 3G USB as backup WAN connection when DSL is not functioning.
Please refer to page 20, Option #2: 3G Dongle, for setup detail on 3G modem.
Note,
You may reverse the primary & backup WAN connection by click Advanced
tag followed by WAN
26
To Next Page
Loading...
