8180 SIP Audio Alerter (G2) FW 1.7
Output Light
Enable/Disable the blue light on the speaker entirely (keep the light off even when the
speaker is active).
Output Light Colour
Configure the LED colour as either blue or red.
Heartbeat Light
If enabled, the small blue indicator will flash every 30 seconds as visual confirmation that
the 8180 is powered and running.
Output Relay
Only visible when ‘Relay Terminal Function’ set to ‘Output’.
Document 90-00095A
01/24/2019
Page 37
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com
To Next Page
