N. Motion Mode: Motion modes include High Precision, Balance, High Efficiency.
Select "High Precision": Slow acceleration to significantly reduce shaking and vibration during
engraving, but with a longer engraving time.
Select "Balance": Moderate acceleration to slightly reduce shaking and vibration during engraving,
with a slightly longer engraving time.
Select "High Efficiency": Maximum acceleration, which may result in some shaking and vibration
during engraving, but significantly reduces the engraving time.
O. Engraving Setting: You can set whether or not a focused laser needs to be prompted during the
engraving process, and set the origin position as well as the engraving range.
59
To Next Page
Loading...