7
1 • GENERAL WARNINGS
• Treatment of chemical substances:
Use appropriate safety measures. Always refer to the data
sheets on safety and to the labels on the product used.
Use the PPEs recommended in the safety data sheets.
• The operator must work on the machine when wearing PPEs
• If technical assistance is required, all information indicated
on the ID plate must be provided, as well as detailed
information about the fault to make it easier for the support
service to understand and resolve the problem.
• Ask the installer for instructions about the correct
management of water softener, as insufficient or poor
maintenance is the main reason for the formation of limescale
that is detrimental to the device.
• The room where the oven is installed must be well-
ventilated!
• The oven power supply must have omnipolar mains switch
with a minimum opening distance between the contacts of at
least 3 mm per pole.
• The device has been designed for permanent connection to
the water mains.
• The mains water pressure must be between 200 and 500 kPa.
• The water hose must be provided by the installer and must be
in compliance to IEC 61770. Do not reuse pre-existing or used
hoses.
90036450rev01
To Next Page
Loading...