4 www.observint.com © 2019 Observint Technologies. All rights reserved.
MS Internet
Explorer icon
Run as administrator
3. Click Run as administrator in the pop-up menu.
Window 10:
To run IE as an Administrator:
1.
F
ind MS IE in the start menu. Usually this is found in the Windows Accessories group.
2.
P
in the entry to Start.
3.
R
ight click on the Internet Explorer tile, and then select More | Run as administrator.
Run as
administrator
To login to the camera from a computer on the same LAN:
1. Open your Microsoft Internet Explorer (IE) browser on your computer and enter the IP address of
the camera in the URL eld. In the example below, the IP address of the camera is 192.168.0.7.
2. In the login window, enter admin for the User Name and the password you created in the
Password eld, the click Login.
3. If this is the rst time you are logging into a camera, you may see the message in the following
screen. If this appears, follow the sub-steps below.
a. Click on the message to install the plugin.
b. In the message bar at the bottom of the screen, click Run. Follow the on-screen
instructions to install WebComponents. When the following screen opens, click Finish.
The Live View screen with the camera video image should appear.
Capture, Record, Zoom icons
Screen select tabs Logout buttonLive View image
Step 8. Adjust camera pan, tilt and rotation
Adjust the camera pan, tilt and rotation to point the camera at your surveillance target. When pointing
the camera, use the Live View display on a recorder or remote login.
1. To aim the camera at your surveillance target:
a. Adjust the pan: grasp the turret and shroud assembly on the sides of the camera and turn.
Tilt range:
0˚ ~ 75˚
Rotation range:
0˚ ~ 360˚
Pan range:
0˚ ~ 360˚
To Next Page
Loading...
