Alienware AW2720HFA - Input Source Selection

38 | Operating the monitor
Input Source Use the Input Source menu to select between the different
video signals that may be connected to your monitor.
DP Select the DP input when you are using the DisplayPort (DP)
connector. Press the joystick button to confirm the selection.
HDMI 1 Select the HD
MI 1or HDMI 2 input when you are using the
HDMI connectors. Press the joystick button to confirm the
selection.
HDMI 2
Auto Select Turn on the function to allow the monitor to automatically scan
f
or available input sources. Press the joystick button to confirm
the selection.
Reset Input
Sour
ce
Resets all settings under the Input Source menu to the factory
defaults.