66 | Operating the monitor
When you change the default setting of power
saving features for the first time,
such as Uniformity Compensation, Smart HDR, or USB, the following message
appears:
NOTE: If you select Yes for either of the features mentioned above, the
message will not appear the next time you change the settings of these
features. When you perform a factory reset, the message will appear
again.
When the monitor goes into Standby mode, the
following message appears:
Activate the computer and wake up the monitor to gain access to the OSD.
The OSD functions only in t
he normal operation mode. If you press the joystick
during the Standby mode, the following message will appear depending on the
selected input:
Activate the computer and wake up the monitor to gain access to the OSD.
NOTE: The message may be slightly different according to the connected
input signal.
To Next Page
Loading...
