Alinco DJ-MD5X - Page 7

7
Sub CH Switch
Turn on/ off the sub channel
Priority Zone
Switch to Priority Zone
Programming Scan
Press the key to start the scan in VFO channel. The scan start
and frequency end frequency shall be programmed in PC
software.
MIC Sound Quality
In digital channel, switch the microphone tone to normal or
enhanced mode
Last Call Reply
In digital channel, press the key to access the last call and
press PTT to call back
Channel Type Switch
Switch the channel type(Analog, Digital, Ana+Dgi, Dgi+Ana)
Ranging
When the radio receives a call and the suspension time is on,
press the key programmed as" Ranging" to obtain the caller's
position and distance. (Both party need GPS positioned, or
will receive only GPS information)