Alinco DX-801 - User Manual

Key safety instructions for operating the transceiver to prevent damage or injury.

Explains typefaces, display examples, and icons used in the manual for clarity.

Highlights the main capabilities and specifications of the transceiver.

Lists the items provided with the transceiver in the shipping carton.

Details base station connections including antenna and grounding.

Guides on connecting microphone, external speaker, and headphones.

Guidance on connecting the transceiver to a regulated DC power supply.

Details the connection diagram and antenna setup for mobile operation.

Instructions for mounting the transceiver and separating the control panel for mobile use.

Explains connecting the power cable and external speaker for mobile use.

Identifies and explains the functions of the front panel controls.

Describes the various segments and indicators shown on the transceiver's LCD screen.

Details the connectors and jacks available on the rear of the transceiver.

Describes other components like the internal speaker and microphone.

Step-by-step instructions for tuning and receiving transmissions.

Instructions on how to set up and perform transmissions.

Explains how to use the CALL channel and fine-tune reception frequency with RIT.

Describes features like noise suppression, frequency check, dial lock, and display brightness.

Covers external antenna tuner control and optional digital voice communication.

Provides a guide to diagnose and resolve common operational problems.

Lists optional accessories and power supplies for the transceiver.

Illustrates the connection setup for the ALINCO EDX-2 antenna tuner.

Shows connection procedures for KENWOOD AT-300 and ICOM AH-3 tuners.

Guide to operating the transceiver in VFO mode for frequency selection.

Lists general performance characteristics and dimensions of the transceiver.

Details the performance metrics for the transceiver's receiver section.