Need help?Do you have a question about the Alinco DJ-F1T and is the answer not in the manual?
General| Modulation | FM |
|---|---|
| Channel Capacity | 200 channels |
| Receiver Sensitivity | 0.16 μV (12dB SINAD) |
| Voltage | 7.4V |
| Current drain TX | 1.5 A |
| Waterproof | IP54 |
| Output Power | 5 W |
| Dimensions | 32 mm |
| Frequency Range | 144-146 MHz |
Step-by-step guide on how to properly insert dry cell batteries into the provided case.
Instructions for charging the Ni-Cd battery pack, including installation and cautions.
Details the functions of each key on the transceiver, both standard and with the F key.
Explains advanced functions accessible by using the F key in SET MODE.
Guides on how to receive signals, adjust controls, and select frequencies.
Details the procedure for transmitting, including power output selection.
Explains different operational modes like VFO, Memory, and Call modes.
Steps to store a frequency into a memory channel.
Procedure to modify the frequency stored in a memory channel.
How to set and perform a program scan between specified frequency limits.
Instructions on how to set the channel step size for frequency tuning.
Details direct frequency entry using the keypad.
Explains different scanning types and operations, including Memory Skip.
To Next Page
