Need help?Do you have a question about the Alinco DJ-190 and is the answer not in the manual?
Instructions for connecting and mounting external antennas, including SWR advice.
Specifies the DC power requirements for mobile operation, including adapter use.
Instructions for setting up the transceiver for fixed base operation.
Instructions on how to charge the Ni-Cd battery pack using the supplied charger.
Details on transmitter output power, emission mode, deviation, and tone frequency.
Details on receiver sensitivity, selectivity, IF frequencies, and audio output.
Instructions on entering memory mode and managing stored frequencies.
Detailed steps for programming and storing frequencies and settings into memory channels.
Steps for setting up and beginning to receive signals, including frequency selection.
Description of the VFO mode for direct frequency tuning and parameter setting.
Instructions on how to reset the transceiver to its default factory settings.
General| Modulation | FM |
|---|---|
| Power Output | 5W |
| Current drain TX | 1.5A |
| Antenna Connector | BNC |
| Type | Handheld |
| Receiver Sensitivity | 0.25μV |
| Dimensions (W*H*D) | 58 mm |
To Next Page
