To Next PageTo Next Page
Need help?Do you have a question about the Alinco DJ-196 and is the answer not in the manual?
General| Brand | Alinco |
|---|---|
| Model | DJ-196 |
| Category | Transceiver |
| Language | English |
General specifications including frequency coverage, mode, channel steps, memory channels, antenna connector, etc.
Details on transmitter output power, modulation system, spurious emissions, and max frequency deviation.
Receiver system, intermediate frequencies, sensitivity, selectivity, and audio output power.
List of standard accessories included with the unit, such as battery pack, wall charger, antenna, etc.
List of optional accessories available for purchase, including chargers, microphones, headsets, etc.
Instructions on how to adjust the audio volume level using the dial and keys.
Instructions on how to adjust the squelch level to control background noise.
Steps to power on the unit and receive signals, including adjusting volume and selecting frequency.
Procedure for transmitting signals using the PTT key and microphone.
How to select operating frequencies using VFO or memory modes.
How to change the channel step size for frequency tuning, affecting increment/decrement steps.
How to set the transmit frequency offset and direction for repeater use.
Detailed procedures for calling, programming, and erasing memory channels.
How to call and change the frequency of the dedicated CALL channel.
How to use Timer Scan and Busy Scan to automatically search for signals.
How to switch between high and low output power levels.
How to activate and deactivate the key lock to prevent accidental key presses.
How to use the Tone Burst function, required for European repeaters.
How to set the auto power off timer to conserve battery life.
How the battery save function reduces power consumption during idle periods.
How to turn on/off the LCD backlight and its behavior.
How to use the monitor function to hear weak signals by opening the squelch.
How to enable or mute the operational beep sounds.
How to shift CPU clock frequency to avoid noise on specific frequencies.
Using tone squelch or DCS for communicating with specific stations.
Setting up tone encoder and tone squelch modes for communication.
Programming specific tone frequencies for encoder and decoder functions.
Setting up and using Digital Code Squelch for selective communication.
How to manually transmit DTMF codes using the keypad during transmission.
Storing DTMF codes for automatic dialing and transmission.
How the auto dialer automatically sends pre-programmed DTMF codes.
Function to retransmit the last transmitted DTMF codes.
Adjusting wait time, burst time, and pause time for DTMF transmissions.
How to display custom alphanumeric labels instead of frequencies in memory mode.
Setting and operating the Time Out Timer to limit transmission duration.
How the TOT penalty function inhibits transmission after TOT expiration.
Preventing transmission on a busy channel to avoid interference.
Transferring memory channel data between transceivers using a cable.
How to set up and use the burglary alarm function.
Controlling external functions via the MIC jack, like VOX.
Activating the mosquito repel sound function.
How to enter and navigate the set mode menu for configuration.
Overview of the various functions that can be programmed within the set mode.
Configuring battery save function (ON/OFF) and scan types (TIMER/BUSY).
Enabling/disabling beep tones and setting tone burst frequencies.
Adjusting clock shift and enabling/disabling Busy Channel Lock Out (BCLO).
Setting the penalty time for the Time Out Timer function.
Configuring DTMF wait time, burst/pause time, and first digit burst time.
Configuring burglary alarm (ON/OFF) and external terminal output (ON/OFF).
Setting the Mosquito Repel Sound function (ON/OFF).
Default values for VFO frequency, CALL frequency, memory channels, and channel step after reset.
