Alinco DJ-196 - Receiver Specifications; Accessories; Standard Accessories; Optional Accessories

RECEIVER
Receive system Double conversion superheterodyne
Intermediate frequencies 1st 21.7MHz／ 2nd 450kHz
Sensitivity(12dB SINAD) Less than –14.0 dBu(0.2uV) [144-147.995MHz]
Less than –12.0 dBu(0.25uV)[135-173.995MHz]
Selectivity -6dB:12kHz or more
-60 dB:24kHz or less
Audio output power 280 mW (typical with an 8ohm load)
200 mW（8ohm10％ THD）
3. ACCESSORIES
Standard Accessories
. EBP-48N（9.6V DC 700mAh）Ni-Cd battery
. EDC-93（120V AC）Wall charger（Ｔversion）**
. EDC-94（230V AC）Wall charger（E version）**
. Flexible rubber helical antenna
. Belt clip
. Hand strap
. Instruction Manual
** Accessories may differ depending on the version you bought.
Optional Accessories
. EBP-48N(9.6V DC 700mAh) Ni-Cd battery
. EDC-36 Mobile Cigarette lighter adapter with active noise filter
. EDC-37 External DC supply cable
. EDC-88 Rapid charger
. EDC-93(120V)Wall charger
. EDC-94(230V)Wall charger
. EMS-9 Speaker microphone
. EMS-51 Speaker microphone
. EME-12 Headset with VOX
. EME-13 Earphone and mic with VOX
. EME-15 Tie-pin mic with VOX
. EME-6 Earphone
. EBC-6 Mobile bracket
. EJ-39D SmartTrunk Logic Board
. ESC-36 Softcase(for use with EBP-48N)