Alinking ALC-9751 - Wireless Networking Modes; Infrastructure Mode; AdHoc Mode

To Next Page

To Previous Page

Mode: Selection of the wireless networking mode

1. Infrastructure: Infrastructure networking mode

The camera uses the wireless Access Point (AP) as the hub when it is in the

infrastructure networking mode and connects to the network via the wireless AP.

2. AdHoc: Point-to-point networking mode

The camera connects to other wireless devices via a wireless network when it is in the

AdHoc point-to-point networking mode; i.e. the product connects to other devices

equipped with built-in wireless connection function without the need to access from

any AP.

Note: Where no IP address is assigned from the DHCP server, the system will set the Link-Local

Address automatically.