AliveCor Kardia - Kardia Band: Emissions and Immunity

AliveCor, Inc. For support, please email support@alivecor.com or visit www.alivecor.com 33
28.2. KARDIA BAND ELECTRICAL SAFETY
The Kardia Band has been tested and deemed in conformance with the relevant
requirements in IEC60601-1-2:2014 Class BG for Electromagnetic Compatibility (EMC).
Guidance and manufacturer's declaration - electromagnetic emissions
Kardia Band is intended for use in the electromagnetic environment specified below. The customer or the user of Kardia
Band should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
Kardia Band uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
Kardia Band is suitable for use in all establishments, including
domestic establishments and those directly connected to the
public low-voltage network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000-3-2
N/A
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
N/A