ALL-FILL B-350Touch - Introduction to the Control Panel; Control Panel Overview

--
The ALL-FILL Model B-350Touch is a versatile auger filling machine that provides reliable, accu-
rate control of filling revolutions along with user-friendly control of other machine components,
such as recycling, agitation, and/or cutoff operation. The actual fill can be initiated at the opera-
tor control panel, or by a footswitch.
This section presents a general description of the controls included on your Model B-350Touch
Control Panel and should be used by those who are unfamiliar with Programmable Logic Control
panels and auger filling machines, in general. Subsequent sections provide detailed, step-by-step
procedures to setup, test, and run filling production.
The Model B-350Touch Control Panel allows you to control and operate your All-Fill filler. A typical
Model B-350e Control Panel is shown in Figure 1. Controls are described in the following.
Model B-350Touch Control Panel Operating Instructions
1
AFI Publication 1200316 ● Issue: Review ● March 2016
INTRODUCTION
Control Panel
Figure 1 – Model B-350Touch
Filler Control Panel
TRANSPARENT
B-350Touch
S
T
O
P
E
M
E
R
G
E
N
C
Y
S
T
O
P
E
M
E
R
G
E
N
C
Y
CONTROL
POWER
INDICATOR
EMERGENCY
STOP
SWITCH
RESET
SWITCH
TOUCH
SCREEN
PANEL