WZ
3
14:4:2 Revised W3 power supply modification
ECN No: 1052
Assembly No(s): 003-171
Date: July 28
th
2004
Reason: Previous modification prone to shorting.
Details of change:
Assy 003-171, PCB AG5395 iss.1
Addtion of H12 sleeving on previous TC Link modification.
This modification supersedes ECN 1040 and was applied to issue 1 PCBs from
28/07/04 until the introduction of the issue 3 PCBs (issue 2 PCBs were never
produced).
To Next Page
Loading...
