Need help?Do you have a question about the ALLEN & HEATH CQ-20B and is the answer not in the manual?
General| Frequency range | 20 - 20000 Hz |
|---|---|
| Channels quantity | 24 channels |
| Supported sample rates | 96 kHz |
| Digital sound processing | - bit |
| Nominal input level | 17 dBu |
| Output impedance | 75 Ω |
| Total Harmonic Distortion (THD) | 0.002 % |
| Built-in display | - |
| Card reader integrated | Yes |
| Compatible memory cards | SD, SDHC |
| Maximum memory card size | 32 GB |
| Bluetooth version | 4.1 |
| XLR out | 8 |
| RJ-45 ports quantity | 1 |
| USB 2.0 ports quantity | 2 |
| Number of microphone inputs | 20 |
| Rack capacity | 19U |
| USB connector type | USB Type-A, USB Type-B |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | - W |
Weight and Dimensions| Depth | 154 mm |
|---|---|
| Width | 372 mm |
| Height | 134 mm |
| Weight | 2600 g |
| Package type | Box |
| Package depth | 260 mm |
| Package width | 450 mm |
| Package height | 250 mm |
| Package weight | 3300 g |
Safety precautions for using the CQ mixer, including reading instructions.
Guidelines for ensuring adequate ventilation for the CQ mixer's cooling system.
Instructions for updating firmware and compatibility notes for apps.
Step-by-step guide for updating firmware using the CQ-MixPad mobile application.
Instructions for updating firmware using a USB drive connected to the CQ unit.
Details on power supply requirements and connections for CQ models.
Initial setup steps for connecting to a CQ-20B using network or reset.
Step-by-step guide on using the Gain Assistant for setting preamp gain.
Guide on detecting and applying filters to prevent audio feedback.
How to send and receive audio to/from a Digital Audio Workstation (DAW).
Steps for recording and playback of multitrack audio using an SD card.
Settings for input channels including source, gain, and phantom power.
Details on Quick Channels, Preamp, Gate, PEQ, and Compressor settings.
Specifics on GEQ, PEQ, Feedback Assistant, Compressor, and Limiter settings.
Using the CQ for stereo audio recording and playback via USB drive.
Recording and playback of multitrack audio using an SD card.
Procedure for performing a factory reset on CQ-12T and CQ-18T models.
Options for factory, Wi-Fi, and Ethernet resets on the CQ-20B.
To Next Page