Need help?Do you have a question about the ALLEN & HEATH DR128 and is the answer not in the manual?
General| Brand | ALLEN & HEATH |
|---|---|
| Model | DR128 |
| Category | Recording Equipment |
| Language | English |
Procedure for altering the fuse or selecting the correct mains voltage setting.
Details the wire colour codes for live, neutral, and earth connections.
Core concepts of audio handling, digital processing, and modular resource racks.
Methods of controlling the unit, installer/operator roles, and expansion options.
Areas for labeling, function keys, and the LCD display information.
ESC, SET, and UP/DOWN keys for menu navigation and parameter adjustment.
Mounting options and access for internal configuration.
Mains power, serial number, SysNet, RS232, and battery input connections.
Remote switch inputs/outputs and audio line/mic/line inputs and outputs.
Guidelines for physically installing the unit in racks or on desks.
Procedures for connecting mains AC power and DC backup power.
Importance and methods of proper grounding for safety and performance.
Recommendations for using quality cables and proper connection techniques.
Starting with default settings and using WinDR for advanced configuration.
Overview of internal adjustments and procedure for accessing components.
Methods for identifying and labeling front panel function keys.
Understanding and setting input/output levels using meters and headroom.
Connecting microphones and line sources via XLR, including pad and phantom power.
How to configure internal jumpers for mic/line pads and phantom power.
Adjusting input gain for optimal signal levels on XLR inputs.
Connecting and calibrating RCA line inputs, including dual summing.
Connecting balanced and unbalanced line level outputs via XLR.
Adjusting output levels for matching destination equipment.
Connecting and assigning functions to remote switches via D-type connectors.
Practical examples of using remote switches for volume control.
Using opto-isolated outputs for remote indication or triggering and wiring them.
How to install the DSPx card for additional processing engines.
How to install the DSPd card for output signal delay.
Details on the operating code, version numbers, and boot code.
Information on compatibility between DR software and WinDR versions.
Steps to install the WinDR software on a PC.
How to launch and connect WinDR to the DR unit.
Assigning functions to front panel and remote keys.
Using the DR Gateway for network-based control.
Using industry-standard remote controllers via SysNet.
Understanding the LCD display during boot-up and normal operation.
How to use SETUP, ESC, and SET keys for menu parameter adjustments.
Visual guide to the setup menu structure and available items.
Key differences between operating software versions 1 and 2.
Procedure to reset the front panel setup menu password.
Where to find additional information and publications for Version 1.
To Next Page
