ALLEN & HEATH AHM-32 User Manual

AHM-16/32 Getting Started Guide
15
AP12764 Issue 1
9. Technical specs
Inputs
System
Mic/Line Inputs
Balanced, +48V phantom power
Measured balanced XLR in to XLR out, 20-20kHz, +5dB Gain,
Pad out, signal @ 0dB (meter)
Mic/Line Preamp
Fully recallable
Dynamic Range
108dB
Input Sensitivity
-60 to +15dBu
System Signal to Noise
-92dB
Analogue Gain
+5 to +60dB, 1dB steps
Frequency Response
20Hz - 20kHz +0/-0.5dB
Pad
-20dB Active PAD
THD+N (analogue in to
out)
0.005% @ +16dBu output, 1kHz
+5dB gain
Maximum Input Level
+30dBu (PAD in)
Headroom
+18dB
Input Impedance
>3kΩ (Pad out), >8kΩ (Pad in)
Sampling Rate
96kHz +/- 20 PPM
Mic EIN
-127dB with 150Ω source
Outputs
Analogue Outputs
Balanced, Relay protected
Output Impedance
<75Ω
Nominal Output
+4dBu = 0dB meter reading
Playback
Maximum Output Level
+21dBu
Internal Storage
~2.6GB
Residual Output Noise
-92dBu (muted, 22-22kHz)
File types
Mono/stereo .WAV (16/24bit,
44.1/48/96kHz), MP3
Dimensions and
Weights
Unboxed
Width x Depth x Height x Weight
Operating Temperature
Range
0 deg C to 40 deg C
(32 deg F to 104 deg F)
AHM-32
482.6mm x 270mm x 44mm x 4kg
(19” x 10.6” x 1.7” x 8.8lbs)
Mains Power (AHM-32)
100-240V AC, 50-60Hz, 70W max
AHM-16
482.6mm x 270mm x 44mm x 3.8kg
(19” x 10.6” x 1.7” x 8.4lbs)
Mains Power (AHM-16)
100-240V AC, 50-60Hz, 65W max
Boxed
AHM-32
555 x 385 x 150 mm x 5.3kg
(21.8” x 15.2” x 5.9” x 11.7lbs)
AHM-16
555 x 385 x 150 mm x 5.1kg
(21.8” x 15.2” x 5.9” x 11.2lbs)

ALLEN & HEATH AHM-32 Specifications

General

Brand	ALLEN & HEATH
Model	AHM-32
Category	Recording Equipment
Language	English