User Guide – AP9209_1 4 ALLEN&HEATH
1. Contents
1. Contents .................................................. 4
2. Introduction to ......................................... 5
3. Front Panel .............................................. 6
4. Rear Panel ............................................... 6
5. Installing ME-U ........................................ 7
5.1 Rack or Surface Mount ..................... 7
5.2 Changing the Input Card .................. 7
6. Connecting ME-U .................................... 8
6.1 Connecting the output ports ............ 8
6.2 ME-1 parallel connection .................. 8
6.3 ME-1 series connection .................... 8
6.4 Linking ME-U hubs ........................... 8
6.5 Cat5 cables ....................................... 8
6.6 Input source – GLD mixer ................. 9
6.7 Input source – Qu mixer ................... 9
6.8 Input source – iLive mixer ACE ........ 9
6.9 iLive via ME-U ACE card ................. 10
6.10 Input source – iLive mixer MMO ..... 10
6.11 Input source - Aviom
®
A-Net 16 ..... 11
6.12 Input source – Other systems ........ 11
7. Starting ME-U ........................................ 12
8. Setting up ME-U .................................... 12
8.1 Setting the network addresses ....... 12
8.2 Starting the Setup Application ....... 12
8.3 Reset the ME-U network settings ... 12
8.4 The Status page ............................. 13
8.5 System Setup page ........................ 14
8.6 Channel Setup page ...................... 15
8.7 Firmware page................................ 17
8.8 To exit Setup ................................... 17
9. ME-U Specification ................................ 18
9.1 Dimensions ..................................... 18
9.2 Specification ................................... 18
9.3 Further information ......................... 18
Check the Allen & Heath web site for the latest version of this user guide
To Next Page
Loading...
