Need help?Do you have a question about the ALLEN & HEATH XB-14 MK2 and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 14 |
| Mic Preamps | 4 |
| Stereo Inputs | 2 |
| Phantom Power | Yes |
| EQ Bands | 3-band |
| Aux Sends | 2 |
| USB | No |
| USB Audio Interface | No |
| Microphone Inputs | 4 |
| EQ | Yes |
Details the conditions under which the warranty is valid, including proper installation and use.
Provides general guidelines for safe operation, handling, cleaning, and environmental considerations.
Instructions for correctly wiring the mains plug, including wire colour codes for safety.
Introduces the XB-14 mixer, its design philosophy, and manufacturing quality.
Highlights the mixer's suitability for various applications, especially broadcasting.
Describes the design and performance characteristics of the mic/line pre-amplifiers.
Explains the 3-band equaliser for mono channels and tone controls for stereo channels.
Details the functions of the single auxiliary bus and the separate stereo Mix B bus.
Describes the dedicated stereo audition bus for monitoring and off-air recording.
Explains the function of the signal presence and peak level LEDs on each channel.
Covers fader start logic, automatic muting, and remote mute options.
Details the mixer's USB audio interface for easy computer connectivity.
Describes the headphone outputs for the operator and guests, including routing.
Explains the output matrix with priority switching for headphone and speaker feeds.
Details the main program outputs which feature an electronically balanced circuit.
Discusses how the mixer supports both self-operated and separate engineer/producer setups.
Details the nominal and maximum operating levels for various inputs and outputs.
Specifies the Total Harmonic Distortion plus Noise for different signal paths.
Provides specifications for the USB audio CODEC, including bit depth and sample rate.
Lists noise figures for microphone preamps and various outputs.
Specifies the headroom available for analogue and USB outputs.
Details crosstalk and attenuation figures between channels and buses.
Outlines the frequency response for microphone, line, and stereo inputs.
Provides the unpacked and packed weight specifications for the mixer.
Details the Mic, Line, and Insert sockets, plus the Gain control and 100Hz filter.
Explains the High, Mid, and Low frequency equaliser sections and their response curves.
Describes the Aux, Mix B, Pan, Audition, On, Signal/Peak LEDs, PFL, and Fader controls.
Details the Telco input socket, CLF output, gain control, and channel filters.
Explains the Talk, CLF Source, Aux, Mix B, and Pan controls for Telco channels.
Describes the Audition switch, On switch, Signal/Peak LEDs, PFL, and Fader for Telco channels.
Details the ST1/ST2 inputs, source selector, level controls, and stereo channel EQ.
Explains the Balance, Audition, On/Start/Cue, Fader, Signal/Peak LEDs, and PFL controls.
Details the Mix B output and the USB return input for ST6.
Describes the CRM speaker outputs and the USB audio send/return functionality.
Details Audition Out, External Monitor Input, PGM Inserts/Outputs, Aux, Mono, and headphone sockets.
Covers 48V Phantom Power, meters, source selectors for CRM/Guest phones, and Talk switch.
Explains controls for CRM Speakers, Phones, EX MON, Mix B, Audition, and Program Mix Fader.
Details the pinouts and functions for REMOTE A (fader logic, mute) and REMOTE B (start/cue).
Describes the external meter connection and configuration switches for channel ON behavior.
Provides wiring examples for remote mute, fader up, and CD deck start/cue functions.
Details the stereo bi-directional USB audio interface and its compatibility.
Provides specific setup notes for connecting the mixer to Windows XP/Vista and Windows 7.
Diagrams and explanations for setting up insert cables for send and return signals.
Provides wiring guidance for Y-adapters, instrument cables, and microphone cables.
Information on exploring other products offered by Allen & Heath.
Instructions on how to register the product for warranty and support.
Details various internal jumper and link modifications for customising mixer functionality.
To Next Page