Need help?Do you have a question about the ALLEN & HEATH SQ-7 and is the answer not in the manual?
General| MIDI out | Yes |
|---|---|
| RJ-45 ports quantity | 1 |
| Channels quantity | 48 channels |
| Supported sample rates | 96 kHz |
| Digital sound processing | - bit |
| DJ mixer | - |
| Product color | Black |
| Power consumption (typical) | - W |
Weight and Dimensions| Depth | 514.9 mm |
|---|---|
| Width | 804 mm |
| Height | 198 mm |
| Weight | 17800 g |
| Package depth | 685 mm |
| Package width | 960 mm |
| Package height | 360 mm |
| Package weight | 21900 g |
Guide to obtaining and installing firmware.
Step-by-step guide for updating firmware via USB.
Description of keys, faders, rotaries, and touchscreen.
Key operational concepts and shortcuts.
Connecting microphones and line-level sources.
Connecting external audio equipment.
Connecting storage and computers via USB.
Using the matrix to route signals.
Enabling and managing signal patches.
Efficiently creating multiple patches.
Understanding the signal processing chain.
Source selection and preamp controls.
Applying alternative preamp characteristics.
Using the gate for dynamic control.
Routing external processing into the channel.
Graphic EQ and Fader Flip mode.
4-band parametric EQ and RTA settings.
Using the compressor for dynamic control.
Configuring direct output signals.
Managing sends for Main, Group, Aux, and FX.
Assigning and managing DCA/Mute group members.
Adjusting channel send levels to mixes.
Managing FX types and presets.
Routing signals to and from FX engines.
Routing mixes or inserts to FX engines.
Storing and recalling all mixer configurations.
Creating, recalling, and managing scenes.
Transferring shows and scenes.
Customizing fader strip layouts.
Configuring channels for stereo operation.
Setting mix buses as groups or auxiliaries.
Customizing surface controls.
Customizing surface behavior and display.
Configuring Pre/After Fade Listen behavior.
Configuring talkback source and mix assignments.
Clock source and AES output settings.
Setting USB mode and sample rate.
Setting SQ role and master fader behavior.
Linking attributes across multiple input channels.
Configuring network IP addresses.
Managing user accounts and access levels.
Selecting SQ-Drive or USB-B operation.
Recording and playing stereo audio files.
Recording and playing multitrack audio files.
USB connection for audio streaming.
Configuring MIDI channels and Machine Control.
Assigning input channels to AMM slots.
Configuring AMM slots and side chain filters.
Purchasing and installing processing models.
Resetting mix parameters to default roles.
Performing a full system reset.
To Next Page