Installation and Setup
To activate Serato DJ with the Allen & Heath XONE:43C it requires a
Serato DJ license to be purchased and activated on your user account.
The Xone:43C also requires the DVS Expansion Pack to be purchased and
activated before unit can be used with NoiseMap™ control tone to control
DVS playback. You can purchase both products here.
The Allen & Heath XONE:43C requires drivers on both Mac OS X and
Windows. Please make sure you have the latest drivers installed. It is
always important to connect your mixer directly to your computer, rather
than a USB hub. Please also ensure you have installed the latest available
version of Serato DJ.
To use the DVS Expansion Pack with the XONE:43C you will need to follow
the steps in the DVS Control section.
To Next Page
Loading...
