DIR 1000719R0632 Version 02 (L8804) - B0301
Copyright © 2015 Rockwell Automation, Inc. All Rights Reserved. Printed in Italy.
Allen-Bradley, Rockwell Software, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Publication 140G-IN087C-MU-P - September 2015
Rockwell Automation maintains current product environmental compliance information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/
sustainability-ethics/product-environmental-compliance.page
LEGEND LEGENDA ZEICHENERKLÄRUNG LÉGENDE LEYENDA
SO = Pushbutton or contact for opening the circuit-breaker
SO = Pulsante o contatto per l'apertura dell'interruttore
SO = Taster oder Schalter zum Öffnen des Leistungsschalters
SO = Bouton-poussoir ou contact pour l’ouverture du disjoncteur
SO = Pulsador o contacto para la apertura del interruptor
SC = Button or contact for switch closing
SC = Pulsante o contatto per la chiusura dell'interruttore
SC = Drucktaster oder Kontakt für Schließen des Schalters
SC = Poussoir ou contact pour fermer le disjoncteur
SC = Pulsador o contacto para el cierre del interruptor
S6/2 = Change over contact for electrical signalling of auto/remote selector status
S6/2 = Contatto di scambio per la segnalazione elettrica di stato del selettore locale/remoto
S6/2 = Umschalter für die elektrische Zustandsmeldug des lokalen/fernen Wahlschalters
S6/2 = Contact inverseur pour signalisation électrique de etat de local/déporté sélecteur
S6/2 = Contacto conmutado para señalización eléctrica de estado de local/remoto selector
MOTOR OPERATOR
FOR G & I FRAME
140G-G-EOP_
19
18
maximum #3 from dia. 0.24" to dia. 0.27"
maximum #3 from ø 6 mm to ø 7 mm
To Previous Page
Loading...
