Allen-Bradley 140U User Manual

c. Press PUSH - TO - TRIP button -
‘la’’ contact - open
“b” contact - closed.
d. If auxiliary switch fails test, make sure that
module is properly seated in trip unit slots. If
problem persists, contact Allen-Bradley.
2
- 1 8 . Install circuit breaker
2
- 19. Connect accessory leads as required.
(See Fig. 2
- 12.)
Allen-Bradley assumes
no responsibility for malfunc -
tioning accessories installed by the customer.
40752-035(1) Effective 3/02
Page 8

Allen-Bradley 140U Specifications

General

Brand	Allen-Bradley
Model	140U
Category	Circuit breakers
Language	English