78 Rockwell Automation Publication 1756-PM004D-EN-P - September 2012
Chapter 4 Data Access Control
Configure Constant Tags
This section describes the various ways a constant attribute can be configured.
Set Up a Constant in the New Tag Dialog Box
Follow these steps to configure a tag as a constant on the New Tag dialog box.
1. On the Controller Organizer, right-click Controller Tags and choose New
Tag .
The New Tag Dialog Box appears.
2. From the Type menu, choose a tag type.
3. Check Constant.
4. Click OK.
See “Constant Checkbox Availability”
on page 81 for considerations.
Configure a Constant in the Tag Properties Dialog Box
Follow these steps to designate a tag as a constant on the Tag Properties
dialog box.
To Next Page
Loading...
