Rockwell Automation Publication 1756-PM004D-EN-P - September 2012 63
Force I/O Chapter 3
3. Right-click a tag that has the force and choose Monitor.
If necessary, expand the tag to show the value that is forced, for example,
BOOL value of a DINT tag.
4. Right-click a tag or element that has the force and choose Remove Force.
Disable All I/O Forces
To disable, choose Logic>I/O Forcing>Disable All I/O Forces. Click Ye s to
confirm.
Remove All I/O Forces
To remove, choose Logic>I/O Forcing>Remove All I/O Forces. Click Yes to
confirm.
To Next Page
Loading...
