Publication 1763-RM001B-EN-P - April 2007
364 Communications Instructions
“This Controller” Parameters
Channel
The MicroLogix 1100 supports Channel 0 and Channel 1 messaging.
Channel 0 is the RS-232/RS-485 port and Channel 1 is the Ethernet port.
If Channel 0 is selected with that channel configured for Modbus RTU
Master, then the next line will display “Modbus Command”. Otherwise,
the next line displays “Communication Command”.
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive
To Next Page
Loading...
