Allen-Bradley CompactLogix 1769-L32E - User Manual

Publication 1769-IN020-C-EN-P - July 2007
Installation Instructions
1769-L32E, 1769-L35E CompactLogix Controller
Catalog Numbers 1769-L32E, 1769-L35E
Topic Page
About This Publication 2
Important User Information 3
North American Hazardous Location Approval 4
Environment and Enclosure 5
Before You Begin 6
Prevent Electrostatic Discharge 7
Connect the 1769-BA Battery 7
Install a 1784-CF64 or 1784-CF128 Industrial CompactFlash Card
(optional)
9
Assemble the System 9
Mount the System 11
Make RS-232 Connections to the Controller 15
Make Ethernet Connections to the Controller 18
Load the Controller Firmware 25
Select the Controller’s Operating Mode 30
Make Ethernet Connections to the Controller 18
Load the Controller Firmware 25
Select the Controller’s Operating Mode 30
Controller Status Indicators 31
RS-232 Serial Port Status Indicators (Channel 0 and 1) 33
sales@roc-electric.com

Allen-Bradley CompactLogix 1769-L32E Specifications

General

Controller Type	CompactLogix
Model Number	1769-L32E
Processor Type	32-bit
Memory	750 KB
Communication Ports	1 Ethernet, 1 Serial
Power Supply	24V DC
Ethernet Speed	10/100 Mbps
Serial Port Protocol	RS-232
I/O Modules Supported	1769 Compact I/O
Ethernet Port	10/100 Mbps
Operating Temperature	0°C to 60°C

Summary

About This Publication

Important User Information

North American Hazardous Location Approval

Environment and Enclosure

Before You Begin

Parts List

Lists the components that ship with the controller and optional components.

Prevent Electrostatic Discharge

Connect the 1769-BA Battery

Install CompactFlash Card

Assemble the System

Mount the System

Minimum Spacing

Details required spacing around the controller for ventilation and isolation.

System Dimensions

Grounding Considerations

Panel Mounting

DIN Rail Mounting

Make RS-232 Connections

Default Serial Configuration

Channel 0 Communication Push Button

Make Ethernet Connections

Assigning an IP Address

Configure IP Address with RSLinx

Install EDS Files

Load Controller Firmware

Use ControlFlash Utility for Firmware

Use AutoFlash for Firmware Loading

Load Firmware via CompactFlash Card

Select Controller Operating Mode

Controller Status Indicators

OK Status Indicator

RS-232 Serial Port Status

CompactFlash Card Status

Module Status (MS) Indicator

Network Status (NS) Indicator

Link Status (LNK) Indicator

Specifications

Environmental Specifications

Certifications

Additional Resources

Rockwell Automation Support

Installation Assistance

New Product Satisfaction Return