1769-L32E, 1769-L35E CompactLogix Controller 29
Publication
1769-IN020-C-EN-P - July 2007
Use a CompactFlash Card to Load Firmware
If you have an existing controller that is already configured and has
firmware loaded, you can store the current controller user program
and firmware on the CompactFlash card and use that card to update
other controllers.
1. Use
RSLogix 5000 software to store the controller user
program and firmware of a currently configured controller to
the CompactFlash card.
2. Acc
ess the Nonvolatile Memory tab of the Controller
Properties dialog.
Be sure to select Load Image On Powerup when you save to
the card.
3. Rem
ove the card and insert it into a controller that will use the
same firmware and controller user program.
When you apply power to the second controller, the image
stored on the CompactFlash card is loaded into the controller.
To Next Page
Loading...
Need help?
General
