1769-L32E, 1769-L35E CompactLogix Controller 7
Publication
1769-IN020-C-EN-P - July 2007
Prevent Electrostatic Discharge
Follow these guidelines to prevent electrostatic damage.
Connect the 1769-BA Battery
The controller is shipped with the 1769-BA battery packed separately.
To connect the battery, follow this procedure.
ATTENTION
This equipment is sensitive to electrostatic discharge, which can cause internal
damage and affect normal operation. Follow these guidelines when you handle
this equipment:
•Touch a grounded object to discharge potential static.
•Wear an approved grounding wriststrap.
•Do not touch connectors or pins on component boards.
•Do not touch circuit components inside the equipment.
•Use a static-safe workstation, if available.
•Store the equipment in appropriate static-safe packaging when not in use.
ATTENTION
The 1769-BA battery is the only battery you can use with the 1769-L32E and 1769-L35E
controllers. The 1747-BA battery is not compatible with the 1769-L32E and 1769-L35E
controllers and may cause problems.
WARNING
When you connect or disconnect the battery, an electrical arc can occur. This could cause
an explosion in hazardous location installations. Be sure that power is removed or the area
is nonhazardous before proceeding.
For safety information on the handling of lithium batteries, including handling and
disposal of leaking batteries, see Guidelines for Handling Lithium Batteries Technical
Data, publication AG-5.4NOV04.
To Next Page
Loading...
Need help?
General
