1769-L32E, 1769-L35E CompactLogix Controller 19
Publication
1769-IN020-C-EN-P - July 2007
Assigning an IP address
You can set the IP address using any of these utilities:
• Rockwell BOOTP Utility (available with RSLinx and RSLogix
5000 software)
• RSL
inx software
• RSL
ogix 5000 software
Use BOOTP to set the IP address
The BOOTP utility is a standalone program that is located in one of
the following directories:
• RSL
inx Tools directory in the Rockwell Software program
folder on the Start menu (the utility is automatically installed
when you install RSLinx software)
• Util
s directory on the RSLogix 5000 software installation CD
Follow this procedure to use the BOOTP utility.
1. Star
t the BOOTP software.
2. Select Tools>Network Settings.
3. Ente
r the Ethernet mask and gateway.
4. Clic
k Ok.
To Next Page
Loading...
Need help?
General
