To Next PageTo Next Page
Need help?Do you have a question about the Allen-Bradley 1769-L27ERM-QBFC1B and is the answer not in the manual?
General| Product Type | CompactLogix Controller |
|---|---|
| Series | 1769 |
| Processor Type | ARM Cortex-A8 |
| Input Voltage | 24V DC |
| Ethernet Ports | 1 |
| USB Port | 1 |
| Power Supply | 24V DC |
| Communication Ports | Ethernet, USB |
| Operating Temperature | 0 to 60 °C |
| Certifications | CE, UL, cUL |
Complete the steps to install the CompactLogix 5370 L3 control system.
Connect the RJ45 connector of the Ethernet cable to one of the controller's Ethernet ports.
Set the IP address for a controller that does not have one assigned.
Change the IP address for a controller that already has one assigned.
Download the current firmware before using the CompactLogix 5370 controller.
Details control, configuration, and data collection services via CIP over internet protocols.
Describes how to connect external 24V DC power to embedded I/O and local expansion modules.
Explains I/O module options: Local Expansion, Distributed EtherNet/IP, and DeviceNet.
Includes distributed I/O modules over an EtherNet/IP network.
Schedule and prioritize program execution based on criteria using tasks.
Controllers support AXIS_VIRTUAL and AXIS_CIP_DRIVE axes for motion control.
Steps to enable time synchronization and add a drive for integrated motion.
Tasks to store a project on an SD card or load a project from an SD card.
Explains how to connect power to the series A L1 CompactLogix 5370 controllers.
