Rockwell Automation Publication 1769-UM021G-EN-P - October 2015 323
Connect Power to the Series A L1 CompactLogix 5370 Controllers Appendix C
7. Connect the wire that is connected to the - terminal on the external 24V
DC power source to the FP- terminal, that is the fifth terminal from the
top, on the removable connector.
8. Plug the removable connector into the controller.
9. Secure the removable connector in place.
10. Turn on power to the separate external 24V DC power source connected
to the VDC+ and VDC- terminals of the removable connector.
11. Turn on power to the external 24V DC power source connected to the
FP+ and FP- terminals of the removable connector.
To Next Page
Loading...
Need help?
General
