Rockwell Automation Publication 2198-UM002G-EN-P - February 2019 235
Configure and Start the Kinetix 5700 Drive System Chapter 6
The Motion Axis Parameters dialog box appears.
7. From the Parameter Group pull-down menu, choose Frequency
Control.
8. Set the FluxUp, SkipSpeed, VelocityDroop, and CurrentVectorLimit
attributes appropriate for your application.
See the corresponding section in Appendix E, beginning on page 405
,
for information and configuration examples regarding all of these topics.
9. Click OK.
To Next Page
Loading...
