Allen-Bradley 22A-A2P3N104 - User Manual

Quick Start
PowerFlex 4 Adjustable
Frequency AC Drive
FRN 2.xx
This Quick Start guide summarizes the basic steps needed to install,
start-up and program the PowerFlex 4 Adjustable Frequency AC Drive.
The information provided Does Not
replace the User Manual and is
intended for qualified drive service personnel only.
For detailed PowerFlex 4 information including EMC instructions,
application considerations and related precautions refer to the
PowerFlex 4 User Manual , Publication 22A-UM001x on the CD
supplied with the drive or at
www.ab.com/manuals/dr.
General Precautions
!
ATTENTION: The drive contains high voltage capacitors which take
time to discharge after removal of mains supply. Before working on
drive, ensure isolation of mains supply from line inputs [R, S, T (L1,
L2, L3)]. Wait three minutes for capacitors to discharge to safe voltage
levels. Failure to do so may result in personal injury or death.
Darkened display LEDs is not an indication that capacitors have
discharged to safe voltage levels.
!
ATTENTION: Equipment damage and/or personal injury may result
if this parameter (A092 [Auto Rstrt Tries], A094 [Start At PowerUp]) is
used in an inappropriate application. Do not use this function without
considering applicable local, national and international codes,
standards, regulations or industry guidelines.
!
ATTENTION: Only qualified personnel familiar with adjustable
frequency AC drives and associated machinery should plan or
implement the installation, start-up and subsequent maintenance of the
system. Failure to comply may result in personal injury and/or
equipment damage.
!
ATTENTION: This drive contains ESD (Electrostatic Discharge)
sensitive parts and assemblies. Static control precautions are required
when installing, testing, servicing or repairing this assembly.
Component damage may result if ESD control procedures are not
followed. If you are not familiar with static control procedures,
reference A-B publication 8000-4.5.2, “Guarding Against Electrostatic
Damage” or any other applicable ESD protection handbook.
!
ATTENTION: An incorrectly applied or installed drive can result in
component damage or a reduction in product life. Wiring or application
errors, such as, undersizing the motor, incorrect or inadequate AC
supply, or excessive ambient temperatures may result in malfunction of
the system.
Allen-Bradley Drives

Allen-Bradley 22A-A2P3N104 Specifications

General

Model	22A-A2P3N104
Category	Controller
Input Voltage	200-240V AC
Output Current	2.3A
Power Supply Type	AC
Mounting Type	Panel
Product Type	Variable Frequency Drive
Amperage	2.3A
Horsepower	0.5 HP
Communication	Ethernet/IP
Model Number	22A-A2P3N104
Enclosure	Open
Digital Outputs	Digital Outputs: 2
Analog Inputs	2
Analog Outputs	1

Summary

General Precautions for PowerFlex 4 Drive

High Voltage Capacitor Discharge Safety

Drive contains high voltage capacitors that take time to discharge. Wait three minutes before working on drive.

Qualified Personnel for Installation and Maintenance

Only qualified personnel familiar with drives should plan or implement installation, start-up, and maintenance.

ESD Sensitivity and Static Control

Drive contains ESD sensitive parts. Static control precautions are required during installation, testing, or servicing.

General Grounding Requirements

Control Terminal Block Configuration

I;O Terminal Functions and Wiring

Details on I/O terminal functions, including start/stop, direction, digital inputs, and analog inputs.

Prepare For Drive Start-Up Procedures

Pre-Power Application Checks

Confirms input connections, AC line power, digital control power, and DIP switch settings before applying power.

Applying Power and Initial Familiarization

Integral Keypad Operation and Navigation

Integral Keypad Layout and LED Indicators

Keypad Navigation and Parameter Access

Viewing and Editing Drive Parameters

Navigating Display and Program Groups

Editing Parameter Values

Basic Program Group Parameters

Motor and Frequency Settings (P031-P035)

Parameters for setting motor rated volts, frequency, current limit, and minimum/maximum output frequency.

Start Source and Stop Mode Configuration (P036-P037)

Configuration of start source (keypad, 3-wire, 2-wire) and stop mode (ramp, coast, brake).

Speed Reference and Acceleration;Deceleration

Parameter Settings for Drive Operation

Preset Frequency and Jog Settings

Motor Overload and Current Limit Settings

Auto Restart and Start at Power-Up

Display Group Parameters and Fault Codes

Common Fault Code Explanations

Descriptions and troubleshooting steps for common fault codes (F2-F122).