Allen-Bradley 22A-V2P3N104

Quick Start
PowerFlex 4 Adjustable
Frequency AC Drive
FRN 2.xx
This Quick Start guide summarizes the basic steps needed to install,
start-up and program the PowerFlex 4 Adjustable Frequency AC Drive.
The information provided Does Not
replace the User Manual and is
intended for qualified drive service personnel only.
For detailed PowerFlex 4 information including EMC instructions,
application considerations and related precautions refer to the
PowerFlex 4 User Manual , Publication 22A-UM001x on the CD
supplied with the drive or at
www.ab.com/manuals/dr.
General Precautions
!
ATTENTION: The drive contains high voltage capacitors which take
time to discharge after removal of mains supply. Before working on
drive, ensure isolation of mains supply from line inputs [R, S, T (L1,
L2, L3)]. Wait three minutes for capacitors to discharge to safe voltage
levels. Failure to do so may result in personal injury or death.
Darkened display LEDs is not an indication that capacitors have
discharged to safe voltage levels.
!
ATTENTION: Equipment damage and/or personal injury may result
if this parameter (A092 [Auto Rstrt Tries], A094 [Start At PowerUp]) is
used in an inappropriate application. Do not use this function without
considering applicable local, national and international codes,
standards, regulations or industry guidelines.
!
ATTENTION: Only qualified personnel familiar with adjustable
frequency AC drives and associated machinery should plan or
implement the installation, start-up and subsequent maintenance of the
system. Failure to comply may result in personal injury and/or
equipment damage.
!
ATTENTION: This drive contains ESD (Electrostatic Discharge)
sensitive parts and assemblies. Static control precautions are required
when installing, testing, servicing or repairing this assembly.
Component damage may result if ESD control procedures are not
followed. If you are not familiar with static control procedures,
reference A-B publication 8000-4.5.2, “Guarding Against Electrostatic
Damage” or any other applicable ESD protection handbook.
!
ATTENTION: An incorrectly applied or installed drive can result in
component damage or a reduction in product life. Wiring or application
errors, such as, undersizing the motor, incorrect or inadequate AC
supply, or excessive ambient temperatures may result in malfunction of
the system.
Allen-Bradley Drives

Allen-Bradley 22A-V2P3N104 Specifications

General

Brand	Allen-Bradley
Model	22A-V2P3N104
Category	Controller
Language	English

Summary

General Safety and Precautions

High Voltage Capacitor Discharge Warning

Warning about high voltage capacitors taking time to discharge after mains removal.

Qualified Personnel Requirement

Only qualified personnel familiar with drives should plan or implement installation.

ESD Sensitive Parts Warning

Control Terminal Block Configuration

IO Terminal 01 Functionality

Terminal Connections Overview

Terminal Signal Mapping

Drive Start-Up Preparation

Safety Precautions Before Power Application

ATTENTION warning about applying power and hazards for qualified service personnel.

Pre-Power System Checks

Steps to confirm input connections, AC line power, digital control power, and DIP switch settings.

Applying Power to the Drive

Integral Keypad Operation

Keypad Menu Structure

Explanation of the menu structure: Display Group, Basic Program Group, Advanced Program Group, and Fault Designator.

LED Status Indicators

Keypad Navigation Functions

Explanation of the Escape, Select, Up/Down Arrow, and Enter keys for navigation and editing.

Control Key Functions

Description of Start, Reverse, and Stop key functions and their control parameters.

Viewing and Editing Drive Parameters

Parameter Display and Navigation

How parameters are displayed, navigating through groups and parameters using keypad.

Entering Program Mode

Modifying Parameter Values

Saving or Canceling Parameter Changes

Basic Program Group Parameters

Motor and Frequency Settings (P031-P035)

Parameters for motor voltage, frequency, current limit, and min/max frequency.

Control and Speed Reference (P036-P038)

Parameters for start source, stop mode, and selecting speed reference source.

Timing and Reset Parameters (P039-P041)

Parameters for acceleration/deceleration times and resetting to factory defaults.

Advanced Group Parameters

Digital Inputs and Relay Outputs (A051-A056)

Parameters for digital input selection and relay output configuration.

Secondary Timing and Frequency (A067-A069)

Preset Frequency and Jog Parameters

Preset Frequency Settings (A070-A073)

Parameters for setting up to four preset frequencies for the drive.

Jog Control Parameters (A078-A079)

DC Brake Parameters (A080-A082)

Start Boost and Current Limit (A084, A089)

Display Group Parameters

Drive Operating Status (d001-d006)

Input and Communication Status (d007-d015)

Version, Time, and Analog Inputs (d016-d021)

Fault Codes and Descriptions

Power Supply and Motor Faults (F2-F8)

Faults related to power loss, voltage issues, motor stalling, overload, and heatsink temperature.

Wiring, Current, and Communication Faults (F12-F81)

Faults for overcurrent, ground faults, phase issues, communication loss, and parameter errors.

System and Board Faults (F122)