Allen-Bradley 5069 CompactLogix - Page 229

Process Control Instructions
Chapter 1
Rockwell Automation Publication 1756-RM006K-EN-P - November 2018 229
Output
Parameters
Data
Type
Description Values
CV2PV1RespTCTun
edM
REAL The calculated value of the control variable time
constant in medium response speed for CV2 - PV1
after tuning is completed.
CV3PV1RespTCTun
edM
REAL The calculated value of the control variable time
constant in medium response speed for CV3 - PV1
after tuning is completed.
CV1PV2RespTCTun
edM
REAL The calculated value of the control variable time
constant in medium response speed for CV1 - PV2
after tuning is completed.
CV2PV2RespTCTun
edM
REAL The calculated value of the control variable time
constant in medium response speed for CV2 - PV2
after tuning is completed.
CV3PV2RespTCTun
edM
REAL The calculated value of the control variable time
constant in medium response speed for CV3 - PV2
after tuning is completed.
CV1PV1RespTCTun
edF
REAL The calculated value of the control variable time
constant in fast response speed for CV1 - PV1 after
tuning is completed.
CV2PV1RespTCTun
edF
REAL The calculated value of the control variable time
constant in fast response speed for CV2 - PV1 after
tuning is completed.
CV3PV1RespTCTun
edF
REAL The calculated value of the control variable time
constant in fast response speed for CV3 - PV1 after
tuning is completed.
CV1PV2RespTCTun
edF
REAL The calculated value of the control variable time
constant in fast response speed for CV1 - PV2 after
tuning is completed.
CV2PV2RespTCTun
edF
REAL The calculated value of the control variable time
constant in fast response speed for CV2 - PV2 after
tuning is completed.
CV3PV2RespTCTun
edF
REAL The calculated value of the control variable time
constant in fast response speed for CV3 - PV2 after
tuning is completed.
AtuneCV1PV1On BOOL Set True when auto tuning for CV1 - PV1 has been
initiated.
AtuneCV2PV1On BOOL Set True when auto tuning for CV2 - PV1 has been
initiated.
AtuneCV3PV1On BOOL Set True when auto tuning for CV3 - PV1 has been
initiated.
AtuneCV1PV1Don
e
BOOL Set True when auto tuning for CV1 - PV1 has
completed successfully.
AtuneCV2PV1Don
e
BOOL Set True when auto tuning for CV2 - PV1 has
completed successfully.
AtuneCV3PV1Don
e
BOOL Set True when auto tuning for CV3 - PV1 has
completed successfully.
AtuneCV1PV1Abor
ted
BOOL Set True when auto tuning for CV1 - PV1 has been
aborted by user or due to errors that occurred
during the auto tuning operation.